REQUIRED TOOLS:
•
5mm Hex Wrench
•
4mm Hex Wrench
•
10mm Box Wrench
[SEE FIGURE
1.
]
INCLUDED HARDWARE:
•
M4 X 12mm bolts (4)
•
M4 X 15mm bolts (2)
•
Washers (6)
•
Adjustable Brackets (2)
•
Adjustable bracket bolts (2)
•
Short Arms (2)
•
Long Arms (2)
•
10mm Locknuts (2)
[SEE FIGURE
2.
]
•
Ensure Adjustable Bracket Bolts are inserted through
Adjustable Brackets with 10mm Locknuts threaded
onto Bracket Bolts. Do not tighten down. Place the
Adjustable Bracket onto bottom side of rear rack within
the slotted face.
*Do note the 10mm Locknuts are positioned on the
inside against the flat side of the Adjustable Brackets.
[SEE FIGURE
3.
]
• While the Adjustable Brackets are in place insert
M4 X 15mm bolts with washers through the slot and
thread into Adjustable Brackets. Do not tighten down.
[SEE FIGURE
4.
]
ADJUSTABLE REAR RACK
INSTALLATION
guide
FIGURE
FIGURE
3.
FIGURE 2.
1.
FIGURE
4.
FIGURE
3.
M4x12mm Bolts (4)
Short
Arms (2)
Long
Arms (2)
10mm Locknuts (2)
Adjustable
brackets (2)
Adjustable
Bracket
Bolts (2)
M4x15mm Bolts (2)
Washers (6)