Installation Guide Linear Motors
ENG
NTI AG / LinMot
P10-54 / P10-54-D24/25/25S
Page 23 / 32
6 Maintenance and test instructions
6.1 Stator connector assignment
Do not connect or disconnect motor when there is power on the servo drive.
Use only original LinMot cable. Cables from other sources must be checked precisely
before commissioning.
Incorrect connections can destroy the drive and stator.
6.1.1 Power Connector
View: Motor connector, plug side
Pin
PS10-54
PS10-54-D24
PS10-54-D25
PS10-54-D25S
Wire color
Motor cable
A
Phase U
Phase U
Phase U
red
PE
PE
PE
PE
yellow-green
B
Phase V
Phase V
Phase V
blue
C
Phase W
Phase W
Phase W
black
(previously: green)
1
n. c.
PTC+
turquoise
2
n. c.
Pt1000-
PTC-
grey
3
n. c.
n. c.
n. c.
n. c.
4
n. c.
n. c.
n. c.
n. c.
5
n. c.
n. c.
n. c.
n. c.
