LINKVIL i61, User Manual

Page: 62 / 87

54
Picture 43 - SnapShot
Capture trigger mode: input trigger, call status trigger, Movement detection trigger
Input trigger: Select the input port to trigger the snapshot
Call status trigger: The snapshot is triggered when an incoming call, call, or call occurs
Movement detection trigger: A capture is triggered when the camera detects abnormal
action
Save the screenshot to the server or SD card.
Server address (Upload through FTP, TFTP, HTTP, or HTTPS) :
ftp://IP:port@用户名：
密码/
9.23
Intercom Setting >> MCAST
It is easy and convenient to use multicast function to send notice to each member of the
multicast via setting the multicast key on the device and sending multicast RTP stream to
pre-configured multicast address. By configuring monitoring multicast address on the
device, monitor and play the RTP stream which sent by the multicast address.
The detail for 8.2 MCAST
9.24
Intercom Setting >> Action URL
Table 26 - action URL
Action URL Event Settings
URL for various actions performed by the phone. These actions are recorded
and sent as xml files to the server. Sample format is http://InternalServer
/FileName.xml