14
7.4
Making Calls
After setting the function key to Hot key and setting the number, press the function
key to immediately call out the set number, as shown below:
Picture 12 - Function Setting
See detailed configuration instructions
After setting the speed dial according to the above settings, i64 can directly dial the set
number by pressing the management center button
.
You can also press the dial button first
, then enter the number you want to call, and
automatically call after timeout.
7.5
Answering Calls
After setting up the automatic answer and setting up the automatic answer time, it will
hear the ringing bell within the set time and automatically answer the call after timeout.
Cancel automatic answering. When a call comes in, you will hear the ringing bell and will
not answer the phone over time.
7.6
End of the Call
You can hang up the call through the Release key (you can set the function key as the
Release key) or turn on the speed dial button to hang up the call. See detailed
configuration instructions
9.26 Function Key
.
i64 can also use the back button
to hang up the call.