Linksys QuickVPN - PC Page 69 User Manual Download

Page: 69 / 111

Linksys QuickVPN for Windows 2000, XP, or Vista

10/100 8-Port VPN Router

Appendix B

In the Router’s web-based utility, click the

VPN

tab.

Click the

VPN Client Access

tab.

Click

Generate

to generate a new certificate (if

needed).

VPN Client Access Screen

To export a client certificate, click

Export for Client

and save the certificate as a

.pem

file.

Distribute the certificate to all QuickVPN users.

Add VPN Client Users

For each QuickVPN client, repeat steps 1-6.

VPN Client Access Screen

On the

VPN Client Access s

creen, enter the user name in

the

User Name

field.

Enter the password in the

New Password

field, and

enter it again in the

Confirm New Password

field.

For the Change Password Allowed setting,

select

Yes

to allow the user to change his or her password.

Otherwise, keep the default,

To activate the new user, select

Active

Click

Add to list

Click

Save Settings

NOTE:

If the Router’s LAN IP address is the

default, 192.168.1.1, then a pop-up window

will appear when you first save these settings.

You will be asked if you want the Router to

automatically change its LAN IP address to

prevent conflicting IP addresses. To allow the

Router to change its LAN IP address, click

Yes

If there is an IP address conflict, the QuickVPN

client will not be able to connect to the Router.

Linksys QuickVPN Client Installation and

Configuration

For each QuickVPN client, do the following:

Install Linksys QuickVPN. (Use the appropriate

installation procedure, “Install from the CD” or

“Download from the Internet”.)
Install the client certificate.

Install from the CD-ROM

Insert the RV082 CD-ROM into your CD-ROM drive.

Click

Start

and then click

Run

. In the field provided,

enter

D:\VPN_Client.exe

(if “

” is the letter of your

CD-ROM drive).
The

License Agreement

screen appears. Read the

agreement. Click

Yes

to accept the terms and

conditions, and then the appropriate files are copied

to the computer. Clicking the

Back

button will

close the window, and the software will not be installed

on the computer.

License Agreement

Summary of Contents for QuickVPN - PC
















































































































Search results

Summary of Contents for QuickVPN - PC

Reviews:

Related manuals for QuickVPN - PC

Brands by name

Popular brands

Linksys QuickVPN - PC, User Manual

Search results

Summary of Contents for QuickVPN - PC

Reviews:

Related manuals for QuickVPN - PC

Brands by name

Popular brands