Linksys Linksys WRVS4400N Page 67 Manual Download | Manualshive

Page: 67 / 79

background image

Firewall

The Firewall Tab allows you to configure software security features like SPI (Stateful
Packet Inspection) Firewall, IP based Access List, restriction LAN users on Internet
(WAN port) access, and NAPT (Network Address Port Translation) Settings (only works
when NAT is enabled) to limited services to specific ports.
Note that for WAN traffic, NAPT settings are applied first, then it will pass the SPI
Firewall settings, followed by IP based Access List (which requires more CPU power).

Basic Settings

Firewall

: SPI (Stateful Packet Inspection) Firewall, when you enable this feature, the

Router will perform deep packet inspection on all the traffic going through the Router
and drop the packets that do not follow the pre-defined protocol behavior. The default is

Enable

.

DoS Protection

: When enabled, the Router will prevent DoS (Denial of Service) attacks

coming in from the Internet. DOS attacks are making your Router’s CPU busy such that
it cannot provide services to regular traffic. The default Is

Enable

.

Block WAN Request

: When enabled, the Router will ignore PING Request from the

Internet so it seems to be hidden. The default is

Enable

.

Remote Management

: When enabled, the Router will allow the Web-based Utility to be

accessed from the Internet. The default is

Disable

.

Multicast Pass-through

: When enabled, the Router will allow IP Multicast traffic to

come in from the Internet. The default is

Disable

.

SIP Application Layer Gateway

When this feature is enabled, the SIP Application

Layer Gateway (ALG) allows Session Initiation Protocol (SIP) packets (used for Voice
over IP) to traverse the NAT firewall. This feature can be disabled if the VoIP service
provider is using other NAT traversal solutions such as STUN, TURN, and ICE.

Block

. Select the Web features that you wish to restrict. All those features could place

security concern to your PCs on the LAN side. You have to balance your needs on those
applications and security. The default is unselected.

«
...
65
66
67
68
69
...
»

Summary of Contents for Linksys WRVS4400N
















































































Reviews:

No comments

Related manuals for Linksys WRVS4400N

Brand: Lucent Technologies Pages: 20

Brand: UfiSpace Pages: 35

Enterasys Matrix 2G4082-25

Brand: Enterasys Pages: 58

Brand: UfiSpace Pages: 34

LMP-1202M-SFP Series

Brand: ANTAIRA Pages: 2

Brand: Tripp Lite Pages: 2

Brand: Dynamix Pages: 102

Brand: Intellinet Pages: 2

Brand: Matrix Switch Corporation Pages: 54

Brand: Toto Link Pages: 57

Brand: Rajant Pages: 93

EdgePoint EP-R8

Brand: Ubiquiti Pages: 22

Brand: Wieland Pages: 2

FrameSaver SLV NNI

Brand: Paradyne Pages: 20

Brand: TP-Link Pages: 2

Application Module 9109 OCU-DP

Brand: Paradyne Pages: 8

AN5506-04 Series

Brand: FiberHome Pages: 146

Brand: C-Data Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands