Linksys AG041 Page 20 User Manual Download

Page: 20 / 80

Chapter 5: Configuring the ADSL Gateway
How to Access the Web-based Utility

ADSL Gateway with 4-Port Switch

Applications & Gaming

•

Single Port Forwarding. Use this screen to set up common services or applications on your network.

•

Port Range Forwarding. To set up public services or other specialized Internet applications on your network,
click this tab.

•

Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.

•

DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.

Administration

•

Management. On this screen, alter Gateway access privileges, SNMP, and UPnP settings.

•

Reporting. If you want to view or save activity logs, click this tab.

•

Diagnostics. Use this screen to do a Ping Test.

•

Factory Defaults. If you want to restore the Gateway’s factory defaults, use this screen.

•

Firmware Upgrade. Click this tab if you want to upgrade the Gateway’s firmware.

Status

•

Gateway. This screen provides status information about the Gateway.

•

Local Network. This provides status information about the local network.

•

DSL Connection. This screen provides status information about the DSL connection.

How to Access the Web-based Utility

To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Gateway’s default
IP address, 192.168.1.1, in the Address field. Then press Enter.

A password request page will appear. (non-Windows XP users will see a similar screen.) Enter

admin

(the default

user name) in the User Name field, and enter

admin

(the default password) in the Password field. Then click the

button.

DMZ

: removes the Router's firewall protection from one

PC, allowing it to be "seen" from the Internet

firmware

:: the programming code that runs a networking device

ping

:: an Internet utility used to determine

whether a particular IP address is online

SNMP

: a widely used network

monitoring and control protocol

ipgrade

:: to

replace existing software or

firmware with a newer version

Summary of Contents for AG041

















































































Search results

Summary of Contents for AG041

Reviews:

Related manuals for AG041

Brands by name

Popular brands

Linksys AG041, User Manual

Search results

Summary of Contents for AG041

Reviews:

Related manuals for AG041

Brands by name

Popular brands