13
d
– maximum time in minutes for which a call may last. This time can be extended
during a call by dialling Prolong Call digit from telephone (
∗
or #). Time setting is
per table.
Parameter Value
Description
Default Exam.1 Exam.2
53 w
time between button
presses
2 2 2
w
– max. time [sec] between button presses [range 1-9]
-
relay closing
– if time between two next presses is bigger than
w
time, the code is not
evaluated correctly.
-
dialling
– if the button pressed is the first password number for switch closing, so the choice is
delayed by this
w
time
.
Parameter Value
Description
Default Exam.1 Exam.2
54 z
On hook time before new
call
2 2 2
z
– time [sec] for which the unit will hang up, before repeat dialling (button pressing during call or dialling,
busy tone detection) [range 1-5]
Parameter Value
Description
Default Exam.1 Exam.2
55 z
Call start time
1 1 1
z
– time [sec] after unit goes on hook before dialling [range 1-5]. This time is different for each PBX, but
most PBXs usually manage to process dialling up to 2 seconds after line on hook.
Parameter Value
Description
Default
Exam.1 Exam.2
56 h
Number of rings before
hanging up or group mode
switching
12 12 12
h
– specifies the amount of time spent ringing before the unit hangs up and tries the next number.
Parameter Value
Description
Default
Exam.1 Exam.2
57 t
DTMF tone duration (ms)
5
(100ms)
5
(100ms)
5
(100ms)
58 m
Space duration between
DTMF tones (ms)
5
(100ms)
5
(100ms)
5
(100ms)
59 f
Recall duration (ms)
1
(100ms)
1
(100ms)
1
(100ms)
50 p
Pause duration (ms)
8
(800ms)
8
(800ms)
8
(800ms)
t
– DTMF tone duration is determined by the formula:
(entered 5) x 10 = tone duration
[ms]
[range
1-0
i.e.
60-150ms]
m
–
Space duration between DTMF tones
is determined by the formula:
(entered 5) x 10 = gap duration
[ms]
[range
1-0
i.e.
60-150ms]
f
– Recall duration is determined by the formula:
entered number x 100 = Recall duration
[ms]
[range
1-6
i.e.
100-600ms]
p
– Pause duration is determined by the formula:
entered number x 100 = pause duration
[ms]
[range
5-0
i.e.
500-1000ms]
time
[min]
choice
0,5 0
1 - 9
1 - 9
15
∗
30 #
