The motion sensor has a detection range of 80
degrees, and detects motion up to 25 feet away.
Note: Make sure system is disarmed.
1. To activate test mode, press the button on the
bottom of the sensor and separate the front portion.
Then replace the front portion and the red light will
turn on for a few seconds.
2. Leave the area and wait for the red light to turn off.
3. Walk across the coverage area to test. If the light
illuminates then the sensor is working properly.
4. The sensor will stay in test mode for 60 seconds with no motion detected.
PET OWNERS
Below are tips on how to place your
motion detector when having pets.
Motion sensors are designed to
avoid detecting pets under 40 lbs.
There are situations when small
pets may trigger your motion sen-
sor. If your pet sets off your motion
detector then try the steps below.
1. With a typical installation of your
sensor, the motion detector looks
straight and down. If you feel your
pet is triggering the motion detector
then you can turn the detector
upside down with the light on the
bottom. Now the motion detector
will look straight and up.
2. If your still experiencing false alarms with the motion detector turned upside down you
may have to relocate to a different area. Make sure that the motion detector isn’t facing
any furniture that your pet has the ability to climb on.
Need help? Call 1-877-826-5443
MOTION SENSOR TESTING
25 feet
20 feet
15 feet
10feet
5 feet
80˚ ARC
5 feet
Flat Mount (5 feet from the floor)
6 feet
3 feet
10 feet
15 feet
20 feet
25 feet
5 feet
Flat Mount - Upside Down (5 feet from the floor)
6 feet
3 feet
10 feet
15 feet
20 feet
25 feet
