Need help? Call 1-877-826-5443
MOTION SENSOR PLACEMENT
Step 1
Remove the back cover of the motion sensor
by pushing on the tab and pulling the back
plate outward.
Note: If you have pets, visit the Resource Center
at www.linkinteractive.com/installation-guide/
for tips to set up your Motion Sensor for use
with pets.
Step 2
Screw the back cover into
the wall (7.5 to 8 feet above
floor level) depending on
the selected location and
desired coverage area. Use
the pilot holes specific to the
installation (fig 1).
Step 3
Starting with the top, click
the motion sensor onto the
back cover (fig 2).
fig 2
fig 1
Corner Mount - Straight
(pet immunity)
Corner Mount -
Angled Down
(no pet immunity)
Flush Wall
Mount - Straight
(pet immunity)
Flush Wall
Mount - Angled Down
(no pet immunity)
