Assembly
Step 1: Floor
Please align the floor in the desired location to start assembling the rear and side walls.
Step 2: Back- and Sidewalls
Please connect the side panels with the back wall panel and the floor panel by placing them on the
grooves of the floor panel. Please align the buckles and then tighten them.
Step 3: Bench
Depending on the model, please install the front bench panel for one or two benches. To do this, slide
it along the horizontal guide on the side panels. Be careful not to scratch the side panels.
Then please install the seat by mounting it on the bench panel.
Step: Front
Now please mount the front panel by placing it on the grooves of the bottom panel. Again, please
align the buckles and then tighten them.
Summary of Contents for Brevik
Page 10: ......
