LINET Eleganza 3XC Page 14 User Manual And Technical Description Download

Page: 14 / 56

Scope of Delivery and Bed Variants

5.1

Scope of Delivery

Delivery:



Upon receipt, check that the shipment is complete as specified on the delivery note.



Notify the carrier and supplier about any deficiencies or damages immediately as well as in writing or
enter them on the delivery note.

5.2

Bed variants

Features:



Model 1GV (model no. see product label)

Basic variants:



Scales



with scales



without scales



X-ray Cassette Holder



with x-ray cassette holder



without x-ray cassette holder

Optional bed accessories:



Castors



Tente Integral 150 mm



Tente Integral 150 mm with fifth castor



Tente Integral 150 mm with fifth retractable castor



Tente Integral 150 mm double castor



Tente Integral 150 mm double castors with fifth castor



Tente Integral 150 mm double castors with fifth retractable castor



Control Elements



Supervisor panel (nurse control panel) with position memory



Handset



Handset with adapter for simple connection (Plug and Play)



Handset with illuminated buttons



Foot control



Control element integrated in the split siderail



Satellite panel



Siderails



split plastic siderail without integrated control elements



split plastic siderail with integrated control elements



Support handles



with 1 pair Mobi-Lift



without 1 pair Mobi-Lift



Safety Night Light



Adapter for Eleganza Protector



I-Brake

Summary of Contents for Eleganza 3XC

























































Search results

Summary of Contents for Eleganza 3XC

Reviews:

Related manuals for Eleganza 3XC

Brands by name

Popular brands

LINET Eleganza 3XC, User Manual And Technical Description

Search results

Summary of Contents for Eleganza 3XC

Reviews:

Related manuals for Eleganza 3XC

Brands by name

Popular brands