67
Rev. 0
APPENDIX G: LOG MEASUREMENTS WITH TERA TERM
Most of the DC2732A example Sketches, for example, the DC2732A_BASIC Sketch, send the measurement data via
the serial monitor to the PC. Any serial terminal software can be used to record this data. For example, the open source
tool Tera Term and its log feature can be used as described here.
LOG MEASUREMENT DATA FROM DC2732A_BASIC TO TEXT/.CSV – FILE
.
2. Start Tera Term.
a.
3. Select right com port (close the serial monitor of the Arduino IDE before!)
a.
4. Set the right baud rate (check .ino file for baud rate setting).
a.
b.
