Linear Security LSE.CD700VAR, Operation Manual

Page: 5 / 12

5
3. PACK CONTENT
3 screws 70mm 3 screws 30mm
3 plug 04mm
Camera in housing..................................... 1
Camera Locking screw (PM3 Type)........... 1
Instruction guide (This Document)............. 1
Surface Mounting Template....................... 1
RCA - BNC test cable.............................. 1
PMounting screw pack............................ 1
Star Shape Dome Cover Tamper key...... 1
4. INSTALLATION
a) Remove the three tamper screws using the star key provided.
b)
Install Method 1
: use included mounting template to mark
and pre-drill the required holes. Use included 2.8” screws to
mount the camera directly to the mounting surface. Proceed to
step 4
Install Method 2 : remove the camera base by unscrewing the
base locking screw (indicated with a padlock marking) and turn
camera module approx. 5 degrees counter-clockwise to detach
camera base from the camera module. Proceed to step 3.
a) If you plan on installing onto a junction box, attach provided mounting plate first to the
junction box and then attach camera base to the mounting plate.
b) Reinsert camera module into camera base by ligning up the arrow notches, and turning
camera module clockwise to lock into place.
c) Reinstall base locking screw as indicated by padlock mark to secure camera base to
camera module.