User Manual
5
IBM Thinkpad Socket and Card Services V2.12
DEVICE=C\EMM386.EXE NOEMS I=B000-B7FF X=C800-CFFF X=D000-DFFF
DEVICE=C:\THINKPAD\IBMDSS01.SYS /D
DEVICE=C:\THINKPAD\IBMDOSCS.SYS
DEVICE=C:\THINKPAD\DICRMU01.SYS /MA=C800-DFFF
DEVICE=C:\THINKPAD\$ICPMDOS.SYS
DEVICE=ENABLE.EXE
Netware DOS ODI Driver
The DOS ODI driver for Netware 3.x and 4.x network operating systems is located in the ODI
directory of the driver diskette. The filename is CARDODI.COM. To install this ODI driver, there
is a batch file called STARTNET.BAT which is located in the same directory. There are five files
needed to install the DOS ODI driver; they are:
1. LSL.COM----- Supported by Novell
2. CARDODI.COM----- ODI driver, supported by this product
3. IPXODI.COM----- Supported by Novell
4. NETX.EXE----- Supported by Novell or EMSNETX.EXE or XMSNETX.EXE
5. NET.CFG----- Configuration File
The NET.CFG file is used to decide the configuration of the Ethernet Card. The following
statements are the sample contents in NET.CFG. If you have any problem with these settings,
check your Netware Operating System user manual.
Protocol
bind CARDODI
Link Driver CARDODI
int 5
port 300
frame Ethernet_802.2
frame Ethernet_802.3
frame Ethernet_II
frame Ethernet_snap
protocol IPX 0 Ethernet_802.3
Packet Driver
To use FTP PC/TCP or NCSA Telnet utilities, a packet driver for the network adapter is needed.
This product supports a packet driver called CARDPD.COM. To load this packet driver, just
execute the following command:
CARDPD 0x60
For detailed syntax, refer to the README.TXT on the driver diskette.
Summary of Contents for 70928
Page 2: ......
