LBOG-100VAC Series PoE++ Optical Backhaul Demarcation Devices
INSTALLATION MANUAL
Page 2 of 6
RJ45 CONNECTION
The Ethernet cable diameter range is 5-12 mm. See photos under the text instructions below.
The components making up the metal connector waterproof covering are in the first photo below (does not include the cable). We recommend a Cat5e or Cat6 cable
rated for the power transformer.
This installation manual includes instructions for both single and dual RJ45/PoE devices. Based on the model purchased, the ports connect the same way. Place the
components for the waterproof covering in the order as shown in the photos, then string the RJ45 cable through. Tighten to the product's RJ45 socket.
SFP FIBER SLOT CONNECTION
See photos under the text instructions below.
The component making up the SFP fiber slot metal gland and cap are in the first photo below (does not include the fiber cable).
Place the components for the SFP fiber slot metal gland and cap in the order as shown in the photos, then string the fiber cable through. Add the SFP transceiver and
plug it into the SFP slot (SFP transceiver not included but available from Lindsay Broadband). Tighten to the product SFP port.
DIMENSIONS
Unit: mm
