LB-ON-300AC/400AC RFoG Optical Node (AGC with Burst Mode)
Operation explanation
1. Clean incoming fiber connector and ONU adapter.
2. Test the optical receiving power to meet the design demand using an optical power
meter.
3. Connect incoming fiber drop to the fiber adopter and power the unit. When the
Receive Optical power indicator turns green the value of input optical power can be
verified at the Receiving optical power test port.
4. RF Test port level is 20dB lower than output port.
5. Return RF signal will be injected into the RF output.
6. Optical Out indicator will illuminate when Return RF signal activates the laser.
Trouble Shooting
1. No power; Check Coaxial cable and connectors, Check power adapter for proper
DC voltage.
2. Low output level: check and clean optical connector and adapter.
3. Other problems, please contact Lindsay Broadband, DO not open unit.
Accessories
1. User
’s manual
：
1pc
2. QC Pass Card
：
1pc
3. Power Adapter
：
1pc
(Different Standard is available)
4. Optional Power Inserter.
Fwd
Output Level
Return
Input Level
Laser
Type
Tx Power
Optical
Connector
Tx
wavelength
Sub Split
Power Adapter
LBON-300AC
−
XX
XX
−
X
−
X
−
XX
−
XX
−
XX
−
XX
LBON-400AC
18 = 18dbmv
20= 20dbmv
F= FP
1= 1mw
SA= SC/APC
31= 1310nm
45= 42/54
00= None
20= 20dbmv
25= 25dbmv
D=DFB
2= 2mw
SU= SC/UPC
47= 1470nm
68= 65/85
01= North America
25= 25dbmv
30= 30dbmv
3= 3mw
FA= FC/APC
49= 1490nm
81= 85/105
02= Europe
36= 36dbmv
35= 35dbmv
FU= FC/UPC
51= 1510nm
53= 1530nm
55= 1550nm
57= 1570nm
Note: LB-ON-400AC has PON pass thru port
59= 1590nm
61= 1610nm
LB-ON-300AC/400AC ONU ORDERING MATRIX
