Linde CiTi One 1150, Original Instructions Manual

Page: 41 / 70

Use
4
Assessing the load
Assessing the load
The truck is fitted with a system for weighing
pallets (or other containers with the same
dimensions). The system has a tolerance of
±25 kg for loads up to 400 kg, provided the
load is correctly positioned (see below).
1.1 Load positioning
A) The load measured must be correctly
positioned on the pallet (centre of gravity in
the middle)
The pallet must be centred on the forks, in
line with the axis of the truck and positioned
against the battery compartment.
B) The height of the pallet must be between
100 and 120 mm.
We do not recommend that you weigh the load
when the pallet is crosswise.
1.2 Use
A) In order to be able to estimate the weight of
the load, the forks must be imperatively in the
lower position.
The CiTi logo appears on the display.
B) To assess the weight of the load, you must
raise the forks without stopping.
C) Once in the upper position, the weight of
the load is automatically displayed in kg.
As long as the forks are not in the lower
position, the weight of the load remains
displayed.
To perform a new measure, restart the above
procedure.
1130 801 15 02 EN – 11/2012 37