manualshive.com logo in svg

Linde CiTi One 1150, Original Instructions Manual

The Linde CiTi One 1150 delivers unparalleled performance in a compact design. To get the most out of this advanced equipment, ensure you have the Original Instructions Manual. Easily download this essential manual for free from manualshive.com, providing you with all the necessary information to maximize your experience with this outstanding product.

Share
Download
background image

Table of contents

g

Assessing the load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Relative battery charge status and periodic discharge . . . . . . . . . . . . . . . . . . . . . . . . . 41
Storing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Slinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5 Maintenance

Specified use (CiTi application) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Opening the battery hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Disconnecting the battery connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Recharging the battery with the charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Main fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6 Technical specification

Technical datasheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

7 Diagrams

Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

II

1130 801 15 02 EN – 11/2012

Summary of Contents for CiTi One 1150







































































Reviews:

No comments

Related manuals for CiTi One 1150

Terex Genie GTH4018 SR Operator'S Manual preview
Genie GTH4018 SR
Brand: Terex Pages: 121
Terex Genie S-80 J Service And Repair Manual preview
Genie S-80 J
Brand: Terex Pages: 135
Terex Genie Z-45 XC Service And Repair Manual preview
Genie Z-45 XC
Brand: Terex Pages: 197
ATN CX 12 Operator'S And Safety Manual preview
CX 12
Brand: ATN Pages: 62

Brands by name

Popular brands

Load more brands