Lincoln CORSAIR 2023, Owner'S Manual

Page: 288 / 690

HOW DOES AUTO HOLD WORK
Auto hold applies the brakes to hold your
vehicle after you bring the vehicle to a stop.
This can help when waiting on a hill or in
traffic.
SWITCHING AUTO HOLD ON AND
OFF
WARNING: The system does not
replace the parking brake. When you leave
your vehicle, always apply the parking
brake.
WARNING: You must remain in your
vehicle when the system turns on. At all
times you are responsible for controlling
your vehicle, supervising the system, and
intervening if required. Failure to follow
this instruction could result in the loss of
control of your vehicle, personal injury or
death.
You can switch the system on or off by
accessing the menu in the SYNC display
screen.
1. Press Features on the touchscreen.
2. Press Driver Assistance.
Note: You can only switch the system on
after you close the driver door, and fasten
your seatbelt.
Note: The system remembers the last setting
when you start your vehicle.
Note: When using an automatic car wash,
make sure to switch auto hold off, or shift to
neutral (N) with the brake pedal applied to
ensure auto hold is not active.
USING AUTO HOLD
1. Bring your vehicle to a complete stop.
The auto hold active indicator illuminates
in the information display.
2. Release the brake pedal. The system
holds your vehicle at a standstill. The
auto hold active indicator remains
illuminated in the information display.
3. Apply the accelerator and drive off in a
normal manner. The system releases the
brakes and the auto hold active indicator
switches off.
Note: The system only activates if you apply
enough brake pressure on the brake pedal
to bring the vehicle to a standstill.
Note: Under certain conditions, the system
could apply the electric parking brake. The
brake system warning lamp illuminates. The
electric parking brake releases when you
press the accelerator pedal. See
Automatically Releasing the Electric
Parking Brake (page 273).
Note: The system switches off if you shift
into reverse (R) or neutral (N) while pressing
the brake pedal.
There could be actions that can cause the
auto hold system not to work when the
following occur:
•
When you use active park assist.
• Your vehicle is in stay in neutral mode.
• The driver door is open.
• You shift into reverse (R) or neutral (N)
before the system is active.
284
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOM
Auto Hold