Lincoln 2017 MKC Owner'S Manual Download Page 507 | Manualshive

Page: 507 / 538

background image

END USER LICENSE AGREEMENT

VEHICLE SOFTWARE END USER
LICENSE AGREEMENT (EULA)

•

You (“You” or “Your” as applicable) have
acquired a vehicle having several
devices, including SYNC ® and various
control modules, ("DEVICES") that include
software licensed or owned by Ford
Motor Company and its affiliates ("FORD
MOTOR COMPANY"). Those software
products of FORD MOTOR COMPANY
origin, as well as associated media,
printed materials, and "online" or
electronic documentation ("SOFTWARE")
are protected by international intellectual
property laws and treaties. The
SOFTWARE is licensed, not sold. All
rights reserved.

•

The SOFTWARE may interface with
and/or communicate with, or may be later
upgraded to interface with and/or
communicate with additional software
and/or systems provided by FORD
MOTOR COMPANY.

IF YOU DO NOT AGREE TO THIS END
USER LICENSE AGREEMENT ("EULA") DO
NOT USE THE DEVICES OR COPY THE
SOFTWARE. ANY USE OF THE SOFTWARE,
INCLUDING BUT NOT LIMITED TO USE ON
THE DEVICES, WILL CONSTITUTE YOUR
AGREEMENT TO THIS EULA (OR
RATIFICATION OF ANY PREVIOUS
CONSENT).

GRANT OF SOFTWARE LICENSE: This EULA
grants you the following license:

•

You may use the SOFTWARE as installed
on the DEVICES and as otherwise
interfacing with systems and/or services
provide by or through FORD MOTOR
COMPANY or its third party software and
service providers.

Description of Other Rights and Limitations

•

Speech Recognition: If the SOFTWARE
includes speech recognition
component(s), you should understand
that speech recognition is an inherently
statistical process and that recognition
errors are inherent in the process.
Neither FORD MOTOR COMPANY nor

its suppliers shall be liable for any
damages arising out of errors in the
speech recognition process. It is your
responsibility to monitor any speech
recognition functions included in the
system.

•

Limitations on Reverse Engineering,
Decompilation and Disassembly: You
may not reverse engineer, decompile,
translate, disassemble or attempt to
discover any source code or underlying
ideas or algorithms of the SOFTWARE
nor permit others to reverse engineer,
decompile or disassemble the
SOFTWARE, except and only to the
extent that such activity is expressly
permitted by applicable law
notwithstanding this limitation or to the
extent as may be permitted by the
licensing terms governing use of any
open source components included with
the SOFTWARE.

504

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Appendices

«
...
505
506
507
508
509
...
»

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Brand: Jeep Pages: 212

KO PROPO RTF 2002 ESC

Brand: Tamiya Pages: 2

Brand: 3SIXT Pages: 12

Brand: DEFA Pages: 9

Slim Line LED Light Grille Kit

Brand: rough country Pages: 8

Brand: FORM FIT Pages: 2

Brand: Fab Fours Pages: 21

Brand: Acura Pages: 19

Brand: Ford Pages: 325

Brand: Metra Electronics Pages: 8

Brand: Curt Group Pages: 2

Pro Competition

Brand: G-Tech Pages: 180

Brand: Intellitronix Pages: 11

Brand: Ratio Electric Pages: 16

Brand: Toyota Pages: 12

handsfree communication

Brand: Toyota Pages: 42

Brand: Autel Pages: 26

Brand: Siemens Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands