manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

PRINCIPLE OF OPERATION

Cruise control lets you maintain a set speed
without keeping your foot on the accelerator
pedal. You can use cruise control when your
vehicle speed is greater than 20 mph
(30 km/h).

USING CRUISE CONTROL

WARNINGS

Do not use cruise control on winding
roads, in heavy traffic or when the road

surface is slippery. This could result in loss
of vehicle control, serious injury or death.

When you are going downhill, your
vehicle speed may increase above the

set speed. The system will not apply the
brakes but a warning displays.

Note: Cruise control will disengage if the
vehicle speed decreases more than 10 mph
(16 km/h) below the set speed while driving
uphill.

E145976

The cruise controls are on the steering
wheel.

Switching Cruise Control On

Press and release ON.

E71340

The indicator appears in the
instrument cluster.

Setting a Speed

1. Drive to desired speed.

2. Press and release SET+.
3. Take your foot off the accelerator pedal.

The indicator changes color in the instrument
cluster.

Changing the Set Speed

Note:  If you accelerate by pressing the
accelerator pedal, the set speed will not
change.  When you release the accelerator
pedal, your vehicle returns to the speed that
you previously set.

•

Press the accelerator or brake pedal until
you reach the desired speed. Press and
release SET+.

•

Press and hold SET+ or SET-. Release
the control when you reach the desired
speed.

•

Press and release SET+ or SET-. When
you select kph as the display
measurement in the information display,
the set speed changes in approximately
2 kph increments. When you select mph
as the display measurement in the
information display, the set speed
changes in approximately 1 mph
increments.

208

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Cruise Control

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Brand: Lancia Pages: 386
Mobile Create MCM3 Instruction Manual preview
MCM3
Brand: Mobile Create Pages: 15
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
Weltmann KFZ-Teile 9B500016 Fitting Instructions Manual preview
9B500016
Brand: Weltmann KFZ-Teile Pages: 12
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
Oldsmobile 1995 Cutlass Supreme Owner'S Manual preview
1995 Cutlass Supreme
Brand: Oldsmobile Pages: 340
OHIOSTEEL 1084TR Quick Start Manual preview
1084TR
Brand: OHIOSTEEL Pages: 2
Renault KANGOO BE BOP Driver'S Handbook Manual preview
KANGOO BE BOP
Brand: Renault Pages: 198
RAM 1500 CLASSIC 2020 Owner'S Manual preview
1500 CLASSIC 2020
Brand: RAM Pages: 360
Lund Tonno Pro Installation Instructions Manual preview
Tonno Pro
Brand: Lund Pages: 12
Subaru impreza 2017 Owner'S Manual preview
impreza 2017
Brand: Subaru Pages: 786
DIGITAL DELAY 1014-SCR Instructions Manual preview
1014-SCR
Brand: DIGITAL DELAY Pages: 11
Volvo 2008 S80 Owner'S Manual preview
2008 S80
Brand: Volvo Pages: 275
Hopkins Engager Instructions preview
Engager
Brand: Hopkins Pages: 4
v.link VL2-CIC Manual preview
VL2-CIC
Brand: v.link Pages: 15

Brands by name

Popular brands

Load more brands