manualshive.com logo in svg

Lincoln 2017 MKC, Owner'S Manual

The Lincoln 2017 MKC Owner's Manual is an essential guide for every MKC owner, providing detailed instructions and insights into the vehicle's operation. Download this manual for free from manualshive.com to fully understand your MKC's features and unleash its potential.

Share
Download
background image

2. Adjust the temperature function to the

desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting as
necessary.

Cooling the Interior Quickly

1. Select the MAX A/C function.

Recommended Settings for Cooling

1. Select the AUTO function.

2. Adjust the temperature function to the

desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting as
necessary.

Side Window Defogging in Cold
Weather

1. Press the defrost button.

2. Adjust the temperature control to the

desired setting. Use 72°F (22°C) as a
starting point, then adjust the setting as
necessary.

HEATED WINDOWS AND MIRRORS

Note: Make sure the engine is running
before operating the heated windows.

Note: Depending on your remote start
settings, the heated windows, mirrors and
wipers may remain on after remote starting
the vehicle.

Heated Rear Window

E184884

Press the button to clear the
heated rear window of thin ice and
fog. The heated rear window will

automatically turn off after a short period of
time. Press the button again to switch it off.

Note: An indicator on the button illuminates
when active.

Note:  Do not use razor blades or other
sharp objects to clean or remove decals from
the inside of the heated rear window.  The
vehicle warranty does not cover damage
caused to the heated rear window grid lines.

Heated Exterior Mirrors

 (If Equipped)

When you switch the heated rear window
on, the heated exterior mirrors will
automatically turn on.

Note: Do not remove ice from the mirrors
with a scraper or adjust the mirror glass
when it is frozen in place.

Note: Do not clean the mirror housing or
glass with harsh abrasives, fuel or other
petroleum-based cleaning products.

Heated Wiper Park

 (If Equipped)

When you switch the heated rear window
on, the heated wiper park automatically turns
on.

136

MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing

Climate Control

Summary of Contents for 2017 MKC



























































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2017 MKC

Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
Prorack K383 Fitting Instructions Manual preview
K383
Brand: Prorack Pages: 14
Cadillac 2007 SRX Owner'S Manual preview
2007 SRX
Brand: Cadillac Pages: 522
Opel 2011 Insignia Owner'S Manual preview
2011 Insignia
Brand: Opel Pages: 254
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Saab 32 025 687 Installation Instructions Manual preview
32 025 687
Brand: Saab Pages: 9
Volvo XC60 2009 Owner'S Manual preview
XC60 2009
Brand: Volvo Pages: 304
injen technology SP7035 Installation Instructions preview
SP7035
Brand: injen technology Pages: 3
CaRobotor Y Pro Instruction Manual preview
Y Pro
Brand: CaRobotor Pages: 9
Hyundai IONIQ HYBRID 2019 Quick Reference Manual preview
IONIQ HYBRID 2019
Brand: Hyundai Pages: 16
Paser KIT052USSU12 Manual preview
KIT052USSU12
Brand: Paser Pages: 10
E-Trailer E-LEVEL Product Manual preview
E-LEVEL
Brand: E-Trailer Pages: 8

Brands by name

Popular brands

Load more brands