Note:
Wet or winter driving conditions with
ice, snow or salty road mist can cause
inconsistent and unexpected wiping or
smearing.
In these conditions, you can do the following
to help keep your windshield clear:
•
Lower the sensitivity of the autowipers
to reduce the amount of smearing.
•
Adjust the rotary control to normal or
high-speed wipe.
•
Switch off the autowipers.
WINDSHIELD WASHERS
E173263
Press the end of the stalk to operate the
washer.
•
A brief press causes a single wipe without
washer fluid.
•
A quick press and hold causes the wipers
to swipe three times with washer fluid.
•
A long press and hold will operate the
wipers and washer fluid for a short time.
A wipe will occur a few seconds after
washing to clear any remaining washer fluid.
This feature can be switched on or off in the
information display. See
General
Information
(page 88).
Note:
Do not operate the washers when the
washer reservoir is empty. This may cause the
washer pump to overheat.
70
MKS (), enUSA
Wipers and Washers
Summary of Contents for 2015 MKS
