manualshive.com logo in svg

Lincoln Electric LINC-CUT AS-CM-LCS1020WF125, Instruction Manual, Page: 5 / 70

Share
Download
Lincoln Electric LINC-CUT AS-CM-LCS1020WF125 Instruction Manual Download Page 5

1

User’s guide

Description of LINC-CUT

®

 S 1020w-1530w

The 

LINC-CUT

®

 S 1020w-1530w

 solution is a plasma cutting machine that is quick to put into service, easy 

to use, and an investment that can pay for itself in a short time.

The machine frame is made up of a steel table incorporating expendable plates that support the stock to cut 

and contain water mixed with a special fluid called “Plateguard red”.

The water captures the dust generated during cutting.

The residual gas that is emitted remains below limit exposure values in certain conditions of use:

1. 

The machine must be installed in a workshop that is large enough, with air renewal,

2. 

Use must be limited to two hours of effective cutting per day (average observed cutting time)

A touch screen and an intuitive user interface with a library of integrated shapes will allow you to start cutting 

at once.

A software suite is supplied to work with your programs, which can be loaded from a USB drive.

The machine is easy to use and maintain, and is guaranteed for two years.

Thanks to 

FLEXCUT 125 CE

 or 

TOMAHAWK

®

 1538

 technology, the machine provides excellent compressed 

air cutting air quality with carbon steel and stainless steel, and offers very high profitability, a long life, reduced 

finishing operations, fewer burrs and better angular quality.

The main target applications are in the industries below:

• 

metal work,

• 

building hardware,

• 

art and leisure,

• 

prototyping,

• 

education,

• 

repair workshops.

Summary of Contents for LINC-CUT AS-CM-LCS1020WF125







































































Reviews:

No comments