23
User’s guide
2 - Starting up the machine
•
Power up the machine by setting switch
E6
to
I
.
Indicator
T1
goes on.
8
E6
T1
This machine operates with an
HPC3 Digital Process HPi
CNC control with a touch screen.
When the
HPC3 Digital Process HPi
CNC control is powered up, it is initialised. (approximately 1 min).
At the end of the initialisation process, the
screen is:
•
Press button
2
to put the machine into service. Button
2
is on and steady.
•
If the button does not light up, check that the emergency stops
1
and at the end of the beam are
released.
•
When it is put into service, the
HPC3 Digital Process HPi
indicates any faults relating to the starting up
of the plasma machine.
•
The lamp
8
lights up and messages are displayed in the screen display bar. Click in the bar and follow
the instructions
Summary of Contents for 8695 4791
Page 6: ...OPTITOME HPC III VI ...
Page 11: ...5 User s guide ...
