Coating Thic
k
ness Gauge
5100
Page 1: ...Coating Thickness Gauge 5100 ...
Page 2: ...nglish 2 3 Svenska 4 5 Norsk 7 Dansk 8 9 Suomi 10 11 Deutsch 12 13 Nederlands 14 15 Français 16 17 Italiano 18 19 Español 20 21 Português 22 23 Ελληvikά 24 25 Polski 26 27 Eesti 28 29 LietuviŠkai 30 31 Latviski 32 33 Pycckий 34 35 6 1 ...
Page 3: ...tomatic off After 2 minuts Operation 1 On or manuell OFF Push the Ө button The instrument will be auto calibrate so always keep the probe away from any metal for 3 seconds after power on 2 Select magnetic or non magnetic material with N NF button The display indicate Fe for magnetic material or NFe for non magnetic material 3 Select μm for reading in 1 1000 mm 4 Place the probe on an layer to be m...
Page 4: ...uncoated area 5 Lift the probe and adjust with the buttons the value on the display to same value as foil 6 Repeat the test measurement and adjust the value until the result is correct It is recommended that calibration is made on same material as to be measured Replace battery When battery symbol shows on the display Remove the battery lid on backside and replace with 4 pcs 1 5 V batterys type AA...
