3
7. Emissivity setup
Emissivity can be adjusted from 0.01 to 1.0. Press SET key three times after powering on to enter emissivity
setup (shown below). Press the keys with up and down arrows to program requested value. When pressing
the key shortly the value will change 1 digit at the time and when holding the key down the digits will count
quickly Instrument will exit setup after 5 seconds if there are no operations.
8. Unit setup
Press SET key four times after powering on to enter unit setup (shown below). Press the keys with up and
down arrows to change between Celsius (°C) and Fahrenheit (°F). Instrument will exit setup after 5 seconds
if there are no operations.
9. Laser beam setup
Press SET key five times after powering on to enter laser beam setup (shown below). Press the keys with up
and down arrows to turn ON or OFF the laser beams. Instrument will exit setup after 5 seconds if there are
no operations.
10. Trigger free measurement setup
Press SET key six times after powering on to enter trigger free measurement setup (shown below). Press the
keys with up and down arrows to turn ON or OFF the trigger free function. Instrument will exit setup after 5
seconds if there are no operations.
11. High and low limit alarm setup
Press HI/LO key change between Hi-Lo/Hi/Lo or no limit alarm (shown below).
Hi Lo = Red light will flash if value is over high limit and blue light will flash if value is below low limit.
Hi = Red light will flash if value is over high limit.
Lo = Blue light will flash if value is below low limit.
If none of above is shown in the display it means that the alarm is turned off.
English
