Installation Guide
Outdoor PTZ CAMERA
BRACKET
Warning: Do not throw your product in municipal waste.
This product has been designed to enable proper reuse of parts and recycling.
The symbol of the crossed out wheeled bin indicates that the product
(electrical and electronic equipment) should not be placed in municipal waste.
Check local regulation for disposal of electronics products.
66-B5208OOE-1
Dimensions
274
70
149.5
70
204
255
［
Pendant Mount
］
［
Wall Mount
］
Unit: mm
[
FIG. 1]
[
FIG. 2]
[
FIG. 3]
[
FIG.4]
[
FIG.5]
244mm
144mm
[
FIG.7]
Installation
Step 1
Detach the PSU Box from the Bracket
Remove the four screws from the PSU box(FIG.1). Rotate the bolt out from the hinge(FIG.2). And separate the PSU box from the bracket
(FIG.3).
Step 2
Install the PSU Box
Use the supplied drill template to drill 4 holes on desired locations
(FIG.4). And tighten the 4 screws to fix the PSU box to the wall
(FIG.5). These four screws are not included in the package. The
user must prepare own screws.
Step 3
Attach the Quick Release Adaptor to the Bracket
Align the notch to attach the quick release adaptor to the bracket
and tighten the bracket screws(FIG.6). Afterwards, fasten the
bracket with the adaptor to the PSU box by rotating the bolt into
the hinge(FIG.7).
[
FIG.6]
