6 66-UM-4KNVR-CSE-6
Below controls can be seen at the bottom of the screen:
Icons
Description
Indicates whether the current split-screen controls are for HDMI
or VGA.
Note:
Available only when VGA Spot mode is on
Controls for the number of split-screens.
Click to broadcast your message through a microphone.
Click to activate the sequential mode, which will show videos
channels in the order you specify.
Click to activate a specific DO output.
Note:
This information is available depending on models.
Below are NVR controls that are at the upper-left corner of the screen:
Icons
Description
NVR Settings
Freeze
Alarm Event
Playback / Backup
Schedule
Manual Recording
Chapter 1-1 NVR Settings Quick Guide
If you access the
NVR SETTINGS
for the first time, you will see
Setup Wizard
on the screen as below,
which provides you with quick configurations for the NVR, including language, password, date, time,
storage, network, P2P, and camera. Please follow the instructions to finish necessary setup and start
recording. To prevent the wizard from appearing again, be sure to check
No longer use Setup Wizard
.
Whenever you want to run
Setup Wizard
again, go to
NVR SETTINGS> SYSTEM > MAINTENANCE
,
and click
Run
to start
Setup Wizard
.
