25 66-UM-4KNVR-CSE-6
⚫
UPnP Device Name: The device name shown on the UPnP network.
⚫
UPnP Service: Switch on/off the UPnP service.
⚫
Network Places: Switch on/off
Network Places
to display shortcuts to shared devices.
⚫
Workgroup: The workgroup name displayed in
Network Places
.
⚫
Device Name: The device name displayed in
Network Places
.
⚫
IE Default Live View: Select the default streaming type (H.264 or MJPEG) when streaming
using Internet Explorer.
⚫
Reset on Ethernet Error: Reset the PHY when an Ethernet error is detected, and leave a record
entry in the event table
⚫
Max Connections: Set the maximum number of simultaneous connections when streaming
using Internet Explorer.
⚫
Browser Auto Logout (30 Minutes): Check to log out after 30 minutes of inactivity.
⚫
SDDP Device Name: The device name shown on the SDDP network.
⚫
SDDP Service: Switch on/off the SDDP service.
⚫
IP Address Filtering:
Switch on/off the IP filtering function, press
Setup
to open the filtering IP
address setting dialog.
⚫
Over Bitrate Protection: Switch on/off protection function that when network input throughput
over the limitation reducing live video decode to protect recording data.
Chapter 3-6-2 SNMP
Simple Network Management Protocol, you can use for collecting information from NVR .
⚫
Enable: Switch on/off SNMP service.
⚫
SNMP v1/v2 Read Only Community: Enter a "read-only" information for remote device to
retrieve.
⚫
SNMP v1/v2 Read/Write Community: Used in responses for information from device and to
modify settings on device.
⚫
SNMP v3 User: Username with authentication.
⚫
SNMP v3 Authentication Password: Password use to authentication, communication with
authentication and without privacy.
⚫
SNMP v3 Privacy Password: Password use to authentication, communication with
authentication and privacy.
⚫
SNMP v3 Read Only User: Users with security level noAuthnoPriv and context name
as
noAuth.
⚫
SNMP v3 Heartbeat Trap: An SNMP trap is a notification, switch on/off.
⚫
SNMP v3 Heartbeat Interval: Use this property to specify the length (in seconds) of the
heartbeat period.
⚫
SNMP v3 Trap Destination IP: Specify the IP address for the SNMP trap destinations.
