SMAX MODBUS®
3 Mechanical installation
WARNING
Installation and maintenance operations have to be carried out by qualified
personnel only, with power supply disconnected. Mechanical parts must be in
stop.
For any information on the mechanical data and the electrical characteristics of
the encoder please refer to the technical catalogue.
3.1 Overall dimensions
(values are expressed in mm)
3.2 Magnetic tape
The sensor has to be paired with the
MTAX type magnetic scale
only. For
detailed information on the MTAX type tape and how to mount it properly,
please refer to the specific technical documentation.
Install the unit providing protection means against waste, especially swarf as
turnings, chips or filings; should this not be possible, please make sure that
adequate cleaning measures (as for instance brushes, scrapers, jets of
MAN SMAX MB E 1.2
Mechanical installation
15 of 84
