Lika SMAG+MTAG Series, User Manual

Page: 12 / 20

SMAG + MTAG SSI
4 – SSI interface
4.1 Electrical connections
WARNING
Electrical connection must be carried out by qualified personnel only, with
power supply disconnected and mechanical parts compulsorily in stop.
Function M8 cable M12 8-pin
0Vdc Black 1
+10Vdc +30Vdc Red 2
Clock IN + Yellow 3
Clock IN -
Blue 4
Data OUT +
Green 5
Data OUT -
Orange 6
Zero setting
White 7
Counting direction Grey 8
Shielding Shield Case
4.1.1 M8 cable specifications
Model : LIKA HI-FLEX sensor cable type M8
Wires : 2 x 0.22 mm
2
+ 6 x 0.14 mm
2
(24/26 AWG)
Jacket : Matt Polyurethane (TPU) halogen free, oil, hydrolysis,
abrasion resistant
Screening : tinned copper braid, coverage

85%
Outer diameter : 5.3 mm ÷ 5.6 mm (0.209” ± 0.220”)
Min. bending radius : Ø x 7.5
Work temperature : -40°C +90°C (-40°F +194°F) – dynamic installation
-50°C +90°C (-58°F +194°F) - fixed installation
Conductor resistance :

90

/km /

148

/km
4.1.2 M12 8-pin connector specifications
Male
Frontal side
A coding
MAN SMAG GA E 1.3.odt 4 – SSI interface 12 of 20