EM58 • HS58 • HM58 POWERLINK
1.3 Mechanical safety
Install the device following strictly the information in the “3 -Mounting
instructions” section on page 24;
mechanical installation has to be carried out with stationary mechanical
parts;
do not disassemble the encoder;
do not tool the encoder or its shaft;
delicate electronic equipment: handle with care; do not subject the device
and the shaft to knocks or shocks;
respect the environmental characteristics declared by manufacturer
unit with solid shaft: in order to guarantee maximum reliability over time of
mechanical parts, we recommend a flexible coupling to be installed to
connect the encoder and user's shaft; make sure the misalignment tolerances
of the flexible coupling are respected;
unit with hollow shaft: the encoder can be mounted directly on a shaft
whose diameter has to respect the technical characteristics specified in the
purchase order and clamped by means of the collar and, when requested, the
anti-rotation pin.
MAN EM58_HS58_HM58 PL E 1.1.odt
Safety summary
22 of 108