LD220
Display with command keys
For function refer to the
Command
menu on page 76.
To switch to the next display, press
the top half of the screen.
Display for quick start of the
preselection values setting process
(see the “
“ section on page
To switch to the next display, press
the top half of the screen.
It is available only with AVI, DO and
RO order codes.
Display with current, minimum and
maximum values.
To switch to the next display, press
the top half of the screen or the
key.
The minimum and maximum values
always refer to the source set in the
page 79.
5.2.2 Error messages
ERROR: MAXIMUM DISPLAY VALUE
The display value of the single line
display is greater than +99,999,999
ERROR: MINIMUM DISPLAY VALUE
The display value of the single line
display is less than -99,999,999
MAN LD220 E 1.4.odt
5 - Display and touch screen
31 of 100
