ES58 • EM58 MODBUS®
3.2 Hollow shaft encoders (ESC58, EMC58, ESC59, EMC59, ESC60, EMC60)
3.2.1 ESC58, EMC58
•
Fasten the anti-rotation pin
1
to the rear of the motor (secure it using a
locknut);
•
mount the encoder on the motor shaft using the reducing sleeve
8
(if
supplied). Avoid forcing the encoder shaft;
•
insert the anti-rotation pin
1
into the slot on the flange of the encoder; this
secures it in place by grub screw
2
, preset at Lika;
•
fix the collar
3
to the encoder shaft (apply threadlocker to screw
3
).
MAN ESx58x_EMx58x MB E 1.3
Mechanical installation
17 of 92
