LIGHTWEIGHT Fernweg Evo, Owner'S Manual, Page: 21 / 36

preparatory work & assembly
21
e
n
g
li
s
h
installing clincher tyres
rim width, outer
(mm)
approved
tyre sizes
min.-max.
approved
tyre inflation pressure
max. (bar/psi)
24 0
25-622 8/116
26-622.–.28-622 7/102
29-622.–.32-622 6/87
rim height
(mm)
required valve length
(mm)
–48 60
–60 80
–80 100
Risk of accident through damaged wheels.
•Î
Use.tubeless.tyres.exclusively.with.wheels.of.the.EVO.series .
Risk of accident through a bursting tyre.
•Î
Never.use.latex.rubber.inner.tubes.–.they.are.unable.to.withstand.
the.temperature.created.by.braking.and.rolling.resistance
•Î
Never.exceed.the.tyre.inflation.pressure.approved.by.us,.because.
the.tyre.inflation.pressure.will.increase.considerably.as.a.result.of.
the.temperature.created.by.rolling.resistance.and.possibly.high.
ambient.temperature.-.see.table
Greatly increased tyre wear.
•Î
Do.not.combine.a.tubeless.tyre.system.with.an.inner.tube.other.
than.in.case.of.breakdown.and.then.only.for.a.short.distance
Never use tools to get the tyre onto the rim. We recom-
mend using talcum powder to ease the installation procedure.
Only use suitable plastic tyre levers when removing your tyres – do
not use metal tyre levers under any circumstances.
Cut a worn or defective tyre with a wire cutter to remove it.
.
)
Only.use.high.quality.and.undamaged.clincher.or.foldable.clinch-
er.tyres.with.suitable.inner.tubes.–.there.is.no.need.to.install.rim.
tape.-.or.a.high-quality.and.undamaged.tubeless.tyre.system
.
)
Observe.the.min /max .inflation.pressure.values.specified.by.the.
manufacturer
L L
The.lower.the.inflation.pressure.or.tyre.width.the.higher.the.risk.
of.pinch.flat .In.most.cases.it.will.be.the.rim.flange. (
1
) .to.suffer.
from.damage . [
C3
]