![background image](http://html.mh-extra.com/html/lightwaverf/jsjslw260/jsjslw260_instruction-manual_1915545006.webp)
Installation
1.
IMPORTANT:
Turn off the mains electrical supply.
2.
Ensure that the wall (back) box has a minimum depth of 35mm.
3.
Remove and disconnect the existing power socket (if applicable). It may
be useful at this point to mark or take a photograph of the existing
connections so that the correct wires can easily be transferred to the new
socket. Some existing wiring configurations can be complex so take care.
4.
Gently remove the socket faceplate by inserting a screwdriver into one of
the bottom slots and lifting away from the unit as shown.