![background image](http://html.mh-extra.com/html/lightwaverf/jsjslw260/jsjslw260_instruction-manual_1915545010.webp)
Device Setup
Linking the sockets to the App / controllers
NOTE:
This procedure applies to the LightwaveRF Smartphone and Web App
and all LightwaveRF controllers (e.g. Handheld Remote or Mood Controller).
LightwaveRF sockets each have
6
unique memory slots
which means they
can link with up to 6 LightwaveRF controllers in total. If you are using a
smartphone/tablet/PC to control the Socket via the Lightwave Link, this will
always count as
ONE
controller and take up one memory slot even if you are
using multiple smartphones/tablets.
1.
On the socket, press and hold down the
‘on/off’ button until the blue and amber LEDs
flash alternately then release them. The
socket is now in
linking mode
.
2.
Using the LightwaveRF Smartphone App,
press the ‘connect’ button (the App instructions
will guide you through this). If using another
controller press the button that you intend to
link. The blue light on the socket will flash to
confirm that the App/controller is now linked.