Page 64 / 127
Section 6. Software control
– using Lightware Device Controller (LDC)
6.11. Advanced view
Advanced view is the surface for LW3 protocol tree with terminal window. Commands and
specific parameters (which are not available on the user interface) can be run and set.
Detailed information about the protocol, nodes, methods and parameters can be found in
chapter
. Click on Close button to hide the Advanced
view.
Terminal window
Commands and responses with time and date are listed in this
window. Sent command is displayed in red and starts with ‘>’
character, received response is displayed in blue and starts
with ‘<’ character. The content of the window can be emptied
by the Clear button. If the Autoscroll option is ticked, the list is
scrolled automatically when a new line is added.
Command line
Type the desired command and execute it by the Send button.
Protocol tree
LW3 protocol tree; select an item to see its content.
Node list
Correspondent parameters and nodes are shown which are
connected to the selected item in the protocol tree.
Manual button:
Manual (short description) of the node can
be called and displayed in the terminal
window. See more information about
on page
Set button:
Saves the value/parameter typed in the
textbox.
Call button:
Calls the method, e.g. reloads factory
default settings.
2
1
3
4
1
2
3
4
Summary of Contents for UMX-TPS-TX120
Page 2: ......
