Lightware UCX Series, User Manual

Page: 11 / 109

2. Product Overview UCX series – User's Manual 11
Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3
2.1. Front View
UCX-4x2-HC30
UCX-4x2-HC30D #new
1
Configurable Ethernet Port RJ45 connector for configurable 100Base-T Ethernet communication.
2
USB-A Port The firmware upgrade function will be added by future firmware
upgrade.
3
USB mini-B Port The service function will be added by future firmware update.
4
USB-C Ports Displayport 1.2 and USB 3.1 Gen1 connections, AV signal can be
transferred up to a resolution of 4K@60Hz 4:4:4 and data speeds
up to 5 Gbps with remote charging. The applied cable shall not be
longer than 3m. For more details about the cables, see USB-C Cable
Recommendation section.
5
Video Input
Status LEDs
See the details in Front Panel LEDs section.
6
USB-B Ports Upstream ports for connecting USB host devices (e.g. computer).
7
USB Status LEDs See the details in Front Panel LEDs section.
8
HDMI Input Ports HDMI input ports for sources. The applied cable shall not be longer
than 5m. Use cables certified for HDMI 2.0 (3x6Gbps) applications.
9
Input Select Buttons For more details, see the Button Functionality section.
INFO: Connecting USB B and HDMI ports to the same PC or laptop is recommended in case of IN3 and
IN4 inputs.
USB-C HDMI ETHERNET 3 USB-B
IN 1 IN 2 IN 3 IN 4
HDMI USB-B USB-C
AUDIO
OUT OUT 2 OUT 1
VIDEO
SERVICE
USB
CONTROL
INPUT SELECT
7 1 2 3 6 8 9 4 5
USB-C HDMI
ETHERNET 3
USB-B
IN 1 IN 2 IN 3 IN 4
HDMI USB-B USB-C
AUDIO
OUT OUT 2 OUT 1
VIDEO
SERVICE
USB
CONTROL
INPUT SELECT
7 1 2 3 6 8 9 4 5
2.2. Rear View
UCX-4x2-HC30
UCX-4x2-HC30D #new
1
DC Input The device can be powered by an external 120W power supply. Connect the
output to the 2-pole Phoenix
®
connector. For more info about the powering,
see Powering Options section.
2
USB-A Port Downstream ports for connecting USB peripherals (e.g. camera, keyboard,
multitouch display) with USB 3.1 Gen1 data speed.
3 HDMI Output Ports HDMI output ports for connecting sink devices.
4
Video Output Status
LEDs
See the details in Rear Panel LEDs section.
5
Analog audio port 5-pole Phoenix
®
connector for balanced analog audio output signal. The signal
is de-embedded from the selected video signal.
6
RS-232 ports This function will be added by future firmware update.
7
OCS sensor 3-pole Phoenix
®
connector (male) for connecting an occupancy
sensor. The port provides 24V output voltage (50mA).
8 GPIO 8-pole Phoenix
®
connector for configurable general purpose.
9 Secure Control LAN RJ45 connector for configurable 100Base-T Ethernet communication.
q Utility AV LAN RJ45 connector provides room utility Ethernet connection for e.g BYOD laptops.
w
Dante
®
Audio
Output
RJ45 connector for de-embedding the HDMI audio which can be transmitted
as a 2-channel Dante
®
or AES67 source.
WARNING! Always use the supplied power supply. Warranty void if damage occurs due to use of a
different power source.
RS-232 DC IN
24V 5A
GPIO
Tx1 Rx1
L R
USB-A USB-A
AUDIO OUT
OCS
SENSOR
IN ETHERNET 1 ETHERNET 2
HDMI
OUT 1 OUT 2
HDMI
1
2
3
4
2 3 4 5 6 1 5V 24V
Tx2 Rx2
CONTROL LAN
SECURE
AV LAN
UTILITY
1 2 3 4 5 6 7 8 9 q
1 2 3 4 5 6 78 9 q
w
   