6. Software Control - Lightware Device Controller
UCX series – User's Manual
55
Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1
6.6.4.
HDMI Video Output
Port properties window of the HDMI video output
Available settings and tools
General
Port name
The name of a port can be changed by typing the new name and clicking on the
Set
button. The following
characters are allowed when naming: Letters (A-Z) and (a-z), hyphen (-), underscore (_), numbers (0-9), and
dot (.). Max length: 63 characters.
Lock
#lock #unlock
The port can be locked to the currently connected output ports by putting the tick. If the port is locked, the
crosspoint state of this port cannot be changed.
Mute
#mute #unmute
The incoming signal can be muted/unmuted by putting a tick. If the port is muted, no signal is transmitted
from the input port.
HDCP Mode
#hdcp
▪
HDCP mode
: Auto / Always - The transmitter forces the source sent the signal without encryption if the
content allows when Auto mode is selected;
#signaltype #hdcp
Output Options
Output 5V Enable
▪
Auto / On / Off - The setting lets the source and the sink devices be connected – independent from
the transmitted signal.
Output Signal Type
▪
Auto / DVI - The outgoing signal format can be selected by a drop-down menu.
Embedded Audio Mute
Put a tick to turn off the embedded audio.
Frame detector
For more details see
