Lightware UCX-2x1-HC30 Page 109 User Manual Download

Page: 109 / 167

7. LW3 Programmers’ Reference

UCX series – User's Manual

109

Applied firmware package: v1.2.0b9 | LDC software: v2.5.10b1

8.5.

System Commands

8.5.1.

Set the Device Label

INFO:

The device label can be changed to a custom text in the

Status

tab of the LDC software.

Command and Response

#devicelabel

#label

SET·/V1/MANAGEMENT/LABEL.DeviceLabel=

<custom_name>

pw·/V1/MANAGEMENT/LABEL.DeviceLabel=

<custom_name>

The Device Label can be 49 character length and ASCII characters are allowed. Longer names are truncated.

Example

SET /V1/MANAGEMENT/LABEL.DeviceLabel=UCX_Conference_room1

pw /V1/MANAGEMENT/LABEL.DeviceLabel=UCX_Conference_room1

8.5.2.

Reset the Device

The switcher can be restarted – the current connections will be terminated.

Command and Response

#reboot #restart

CALL·/V1/SYS:restart()

mO·/V1/SYS:restart=

Example

CALL /V1/SYS:restart()

mO /V1/SYS:restart=

8.5.3.

Restore the Factory Default Settings

Command and Response

CALL·/V1/SYS:factoryDefaults()

mO·/V1/SYS:factoryDefaults=

Example

CALL /V1/SYS:factoryDefaults()

mO /V1/SYS:factoryDefaults=

The device is restarted, current connections are terminated, and the default settings are restored. See the

complete list in the

Factory Default Settings

section.

#factory

8.5.4. Querying the Firmware Package Version

Command and Response

#firmwareversion

GET·/V1/MANAGEMENT/UID/PACKAGE.Version

pr·/V1/MANAGEMENT/UID/PACKAGE.Version=

<firmware_version>

Example

GET V1/MANAGEMENT/UID/PACKAGE.Version

pr /V1/MANAGEMENT/UID/PACKAGE.Version=1.0.0b2

8.5.5.

Control Lock

Enable/disable the operation of the front panel buttons.

Command and Response

#lockbutton

#buttonlock

SET·/V1/MANAGEMENT/UI.ControlLock=

<lock_status>

pw·/V1/MANAGEMENT/UI.ControlLock=

<lock_status>

Parameters

Parameter

Parameter description

Values

Value description

<lock_status>

Front panel button

locking status

None

All functions of the front panel button are enabled.

Locked

The front panel buttons are locked and can be unlocked

by button combination (

Control Lock

Force

locked

The front panel buttons are locked and cannot be

unlocked by button combination, only in LDC (on the

Status

tab) or using the LW3 command.

Example

SET /V1/MANAGEMENT/UI.ControlLock=force locked

pw /V1/MANAGEMENT/UI.ControlLock=force locked

8.5.6.

Set Current Time

Command and Response

#time

CALL·/V1/MANAGEMENT/DATETIME:setTime(

<current_time>

)

mO·/V1/MANAGEMENT/DATETIME:setTime=

Parameters

<current_time>:

The new router time in ISO 8601 date time format.

Example

CALL /V1/MANAGEMENT/DATETIME:setTime(2020-11-01T04:39:54.000Z)

mO /V1/MANAGEMENT/DATETIME:setTime=



 



Summary of Contents for UCX-2x1-HC30







































































































































































Search results

Summary of Contents for UCX-2x1-HC30

Reviews:

Related manuals for UCX-2x1-HC30

Brands by name

Popular brands

Lightware UCX-2x1-HC30, User Manual

Search results

Summary of Contents for UCX-2x1-HC30

Reviews:

Related manuals for UCX-2x1-HC30

Brands by name

Popular brands