8. Lightware Device Controller
UBEX series – Matrix Application Mode – User's Manual
89
8. Lightware Device Controller
UBEX series – Matrix Application Mode – User's Manual
89
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
8.12.2. No Sync Screen (Test Pattern)
The No sync screen feature generates an image which can be
displayed when there is no incoming signal on the port. The
following settings can be set for the Test Pattern function:
Mode
▪
Always on
: the video output port always transmits the
test pattern.
▪
Auto
: the video output port transmits the test pattern if
there is no incoming signal on the selected input port.
▪
Always off
: the test pattern function is disabled, the
video output port transmits the video signal of the
selected input port.
Color
Three ways are available to set the no sync screen color:
▪
Click on the predefined color;
▪
Use the sliders;
▪
Type the RGB code of the color.
When the desired color is selected, press the
Set color
button
to store.
#testpattern #nosyncscreen
Port Tile
The port tile of the HDMI outputs displays when No sync screen mode
is active.
INFO:
No sync screen will be active in the case of connected sink
device to the output port only.
No signal
No Sync Screen
HDMI out 2
#2
0.00 Gbps
8.12.3. Identify Stream / Identify Display
Clicking on the Identify Stream / Identify Display button makes generating 10 test colors on the display
device for 10 seconds. The feature helps to identify the stream and the screen itself physically.
#identifystream
#identifydisplay
The order of the generated colors
