Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 60 / 185

5. UBEX Concept series – Extender Application Mode – User's Manual 60 5. UBEX Concept series – Extender Application Mode – User's Manual 60
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
Description
The receiver can receive two HDMI audio streams via the SFP+ links. The streams can be selected to any
HDMI output ports, the crosspoint setting is available in the receiver as well.
Source Multiplexer (MUX)
INFO: The source MUX function can be set on the video side only in the Lightware Device Controller (LDC
software and using LW3 protocol commands as well.
The source multiplexer (
Source MUX
) makes available routing more different source signals to the HDMI
output ports. The type of sources is different by the two outputs.
HDMI out 1
▪ Able to accept audio signal
via the SFP+ links
from the remote endpoint device;
▪ Able to accept audio signal
via the local HDMI in 1
port.
HDMI out 2
▪ Able to accept audio signal
via the SFP+ links
from the remote endpoint device;
▪ Able to accept audio signal
via the local HDMI in 2
port;
▪ Able to
copy the signal of the HDMI out 1
port. This is the
COPY
function.
HDMI Input Modes
The HDMI input ports of the receiver operate as local HDMI inputs.
Connection with an F110 Endpoint Device
When the F100/R100 receiver connects to an F110 endpoint device, the number of audio inputs expands
to three due to the analog audio input stream received via the SFP+ links. In this case the digital audio
crosspoint changes to 3x2 (3 inputs and 2 outputs).
5.2.3. Transceiver Mode - F100/R100 Models
Port Diagram
The port diagram is valid for the following UBEX endpoint model:
▪
UBEX-PRO20-HDMI-F100
▪
UBEX-PRO20-HDMI-R100 series
Audio port diagram of the F100/R100 transceiver in connection with an F110 endpoint
Description
The transceiver can receive an HDMI audio stream via the SFP+ links and transmitting on the HDMI out 1
port.
The transceiver receives an HDMI audio signal via the HDMI input 2 port. The audio stream is transmitted
toward the remote endpoint device over the SFP+ links.
In default state, the HDMI out 2 transmits the HDMI signal coming from the HDMI in 1 input port so it
operates as a local output port.
The HDMI input 1 port of the transceiver cannot accept audio signals due to software limitation.
Source Multiplexer (MUX)
INFO: The source MUX function can be set on the video side only in the Lightware Device Controller (LDC)
software and using LW3 protocol commands as well.
The source multiplexer (
Source MUX
) makes available routing more different source signals to the
HDMI output 2 port.
HDMI out 2
▪ Able to accept audio signal
via the local HDMI in 2
port;
▪ Able to
copy the signal of the HDMI out 1
port. This is the
COPY
function.

  

  