manualshive.com logo in svg

Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 47 / 185

Share
Download
Lightware UBEX-PRO20-HDMI-F100 User Manual Download Page 47

 

4. Installation 

series – Extender Application Mode – User's Manual 

47

 

4. Installation 

series – Extender Application Mode – User's Manual 

47

EXTENDER  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3

4.8.4. Check the Signal Status

The 

Crosspoint menu

 in the LDC software displays all important information about the incoming, transmitting, 

and outgoing HDMI signals. For more detailed information see the 

Video Crosspoint Menu

 section.

The video crosspoint menu in the LDC software for TX-RX pair

Transmitter (UBEX TX) Side

Step 1. 

Check the HDMI signal status on the 

HDMI in 1 and 2 input ports

 - if the 

signal status indicator

 is green, the 

signal is present; if it is grey, there is no incoming signal on the port.

Step 2. 

Check the HDMI signal status on the 

HDMI out 1 and 2 local output ports

 - if the 

signal status indicator

 is 

green, the signal is present and sink device is connected; if it is grey, no transmitted signal on the port.

Step 3. 

Check the video streams in the 

Stream 1 and 2 panels

 - if the 

signal status indicator

 is green, the signal is 

present; if it is grey, there is no incoming signal on the port. Also check the 

enable status

 of the stream 

on the stream settings panel.

Receiver (UBEX RX) Side

Step 1. 

Check the 

Stream switcher

 - the desired stream is switched to the HDMI output port.

Step 2. 

Check the HDMI signal status on the 

HDMI out 1 and 2 output ports

 - if the 

signal status indicator

 is green, 

the signal is present and sink device is connected; if it is grey, no transmitted signal on the port.

Transceiver (UBEX TRX) Side

Step 1. 

Check the HDMI signal status on the 

HDMI in 2 input port

 - if the 

signal status indicator

 is green, the signal 

is present; if it is grey, there is no incoming signal on the port.

Step 2. 

Check the HDMI signal status on the 

HDMI out 1 output port

 - if the 

signal status indicator

 is green, the 

signal is present and sink device is connected; if it is grey, no transmitted signal on the port.

SFP+ Links

Check the connection status of the SFP+ links:

 

▪

Green arrows

 mean connection is established and TCP/IP packages are 

transmitted successfully.

 

▪

Amber arrows

 mean connection is established but error happened during 

the transmission of the TCP/IP packages - check the SFP+ connection.

 

▪

Red arrows

 mean no connection is established between the endpoint 

devices.

4.8.5. Set the Source MUX Settings

DEFINITION: 

The source multiplexer (

Source MUX

) makes available routing more different source signals 

to the HDMI output ports. The setting is available only on the output ports of the receiver and transceiver 

operation modes. The type of sources is different for the 

outputs.

Click on the left side of the output port tile to access the MUX 

settings. The available options are the following:

Receiver (UBEX RX) Side

For HDMI out 1

 

▪

Stream

 - The source signal is the stream received 

via the SFP+ links

 from the remote endpoint device;

 

▪

HDMI in 1

 - The source signal is the stream received 

via the local HDMI in 1

 port.

For HDMI out 2

 

▪

Stream

 - The source signal is the stream received 

via the SFP+ links

 from the remote endpoint device;

 

▪

HDMI in 2

 - The source signal is the stream received 

via the local HDMI in 2

 port.

 

▪

Copy

 - The receiver is able to 

copy the signal of the HDMI out 1

 port. This is the 

COPY

 function.

Transceiver (UBEX TRX) Side

For HDMI out 2

 

▪

HDMI in 2

 - The source signal is the stream received 

via the local HDMI in 2

 port.

 

▪

Copy

 - The receiver is able to 

copy the signal of the HDMI out 1

 port. This is the 

COPY

 function.

 

 

Summary of Contents for UBEX-PRO20-HDMI-F100


























































































































































































Reviews:

No comments