Lightware UBEX-MMU-X200, User Manual, Page: 98 / 253

8. Software Control - Lightware Device Controller series – Matrix Application Mode – User's Manual 98 8. Software Control - Lightware Device Controller series – Matrix Application Mode – User's Manual 98
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
Stream Properties Panels
Clicking on the Stream 1 or Stream 2 panels open the properties of the video input streams. The most
important signal information and settings are available from the panel.
Endpoint tab of the Device properties window - Transmitter - Stream properties
Settings
▪
Stream naming
;
▪
Enabled
: when it is checked in, the stream is enabled; if it is not, the stream is muted. #streamenable
▪
Tile icon
: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
▪ Identify Stream / Identify Display . #identifystream #identifydisplay
Scaler Settings (only for the Stream of the HDMI in 1)
▪
Scaling mode
:
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the Resolutions of the Scaler / FRC section.
▪
Image position
(Stretch / Fit / Center)
▪
Color space conversion
(No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2).
▪
Color range
(No conversion / Full range / Limited range); #new
▪ No Sync Screen (Test Pattern) .
Frame Rate Converter Settins (only for the Stream of the HDMI in 2)
▪
Output resolution mode
:
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the display device. See the available resolution in the Resolutions of the Scaler / FRC
section.
▪
Color space conversion
(No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪
Color range
(No conversion / Full range / Limited range); #new
▪ No Sync Screen (Test Pattern) .
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the Search Field .
#scaler #frc #csc #colorspace #colorrange #testpattern #nosyncscreen #tag

  

  