8. Software Control - Lightware Device Controller
series – Matrix Application Mode – User's Manual
93
8. Software Control - Lightware Device Controller
series – Matrix Application Mode – User's Manual
93
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
8.9. Video Destination Port Properties Window
Clicking on a destination port the properties panel opens on the right side. Clicking on the
icon the
properties section opens in new window.
Video destination port properties window
8.9.1. Stream Information
The most important information and settings of the stream are available in the Stream information section.
Settings
▪
Stream naming
;
▪
Enabled
: when it is checked in, the stream is transmitted to the receiver; if it is not, the stream is muted.
▪
Stream source
: information about the currently connected stream and the ID of the source device.
▪
Disconnect stream
: clicking on the button results the source stream is disconnected from the output
port.
▪
Tile icon
: choose an icon which is the most suitable with the source/destination device connected to
the endpoint.
#streamenable
Tags
Unique and configurable tags can be attached to the stream for the best identification. The tags are
searchable in the
#tag
Signal Info
All important information (resolution, pixel clock, color space, e.g.) are available in the signal info section.
The
signal bandwidth
and the
bandwidth limit reached
indicator are also can be checked in this panel.
Related Audio Info
Information (presence, audio type, sampling frequency) of the embedded audio is available in the related
audio info section.
Tools
▪
- The tool displays the frame information of the original stream coming from the
connected source stream before a possible rescaling / frame rate conversion.
8.9.2. Port Information
The most important information and settings of the input port are available in the Port information section.
Port Selector
INFO:
The port selector menu is available for
receiver
operation mode only.
The two output ports which belong to the same endpoint device can be selected in the Port selector menu.
Because of the Source MUX settings it may happen that the selected destination stream is connected to
none of the output ports because the source stream is the local input port or the copy of the HDMI out 1. The
video settings and the port/signal information are still available with the port selector menu.
DEFINITION:
The source multiplexer (
Source MUX
) makes available routing more different source signals
to the HDMI output ports. See more details about this function in the
and
sections.