Lightware UBEX-MMU-X200, User Manual, Page: 63 / 253

6. UBEX Concept series – Matrix Application Mode – User's Manual 63 6. UBEX Concept series – Matrix Application Mode – User's Manual 63
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4
6.3.3. Transceiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪
UBEX-PRO20-HDMI-F100
▪
UBEX-PRO20-HDMI-F110
▪
UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transceiver
Fiber Optical Interface
The transceiver is able to send and receive HDMI video streams together in the same time over the fiber
optical links.
HDMI Input Modes
The transceiver can receive one HDMI video stream from the HDMI in 2 input port. The signal can be up to
4K@60 Hz 4:4:4. The video stream can be processed in the video processor (it contains
frame rate converter
(FRC)
and
color space converter (CSC)
functions). The video processor settings are available in the LDC software
(see the details in the Video Source Port Properties Window or in the Source Stream Panel section).
The HDMI in 1 input port cannot accept video signal.
HDMI Output Modes
The transceiver can transmit HDMI video streams on two HDMI 2.0 output ports. The signal can be up to
4K@60 Hz 4:4:4 in the case of both outputs.
The HDMI out 1 transmits the HDMI signal coming from the remote UBEX endpoint. The video stream can
be processed in the video processor (it contains
scaler
,
frame rate converter (FRC)
and
color space converter
(CSC)
functions). The video processor settings are available in the LDC software (see the details in the Video
Destination Port Properties Window or in the HDMI Out 1 Panel section).
In default state, the HDMI out 2 transmits the HDMI signal coming from the HDMI in 1 input port so it
operates as a local output port. The stream cannot be affected by any video processing.
Source Multiplexer (MUX)
The source multiplexer (
Source MUX
) makes available routing more different source signals to the
HDMI output 2 port.
HDMI out 2
▪ Able to accept signal up to 4K@60 4:4:4 resolution
via the local HDMI in 2
port;
▪ Able to
copy the signal of the HDMI out 1
port up to 4K@60 4:4:4 resolution. This is the
COPY
function.
ATTENTION! If the selected source is the local input port or the copy of the HDMI out 1, the output is still
selectable as a destination in the global crosspoint table. It means the crosspoint setting is not forbidden
for the selected output and it is still included in the bandwidth calculation. When the sum of the two
incoming streams exceeds the bandwidth limit, the signal transmission can be denied on the HDMI out 2
port even if the incoming stream of the HDMI out 1 is not used. The solution of this limitation is disabling
of the unused destination port.
Summary Tables
HDMI INPUTS
HDMI input 1 HDMI input 2
Accepted signal

up to 4K@60 4:4:4
Scaler - -
Frame rate converter (FRC) -
 
Color space converter (CSC) -
 
HDMI OUTPUTS
HDMI output 1 HDMI output 2
Output signal up to 4K@60 4:4:4 up to 4K@60 4:4:4
Signal source Input port of the remote device
MUX
HDMI in 2
Copy of the HDMI out 1
Scaler
 
-
Frame rate converter (FRC)
 
-
Color space converter (CSC)
 
-

  

  