manualshive.com logo in svg

Lightware UBEX-MMU-X200, User Manual, Page: 234 / 253

Share
Download
Lightware UBEX-MMU-X200 User Manual Download Page 234

 

14. Appendix 

series – Matrix Application Mode – User's Manual 

234

 

14. Appendix 

series – Matrix Application Mode – User's Manual 

234

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.5.4 | Applied R-series endpoint firmware package: v1.5.4 | Applied MMU firmware package: v1.3.3 | LDC software: v2.4.2b4

14.5. Release Notes of the Firmware Packages

14.5.1. Endpoint Series

Valid for the following models:

 

▪

UBEX-PRO20-HDMI-F100

 

▪

UBEX-PRO20-HDMI-F110

 

▪

UBEX-PRO20-HDMI-R100 series

v1.5.4b1

Release date: 2020-10-07

Bugfix:

 

▪

Fixed the video timing and audio bug. 

v1.5.3b1

Release date: 2020-09-10

New feature:

 

▪

Added 3840x2400p60_reduced timing to scaler

Bugfix:

 

▪

Fixed a glitch with static IP settings storage

 

▪

Fixed the inconsistency of factory default network settings on RX devices

 

▪

Fixed a regression in EOL testing

v1.5.2b1

Release date: 2020-08-12

Bugfix:

 

▪

Fixed a compatibility issue with older LDU2 releases

 

▪

Fixed reliability problems with the HTTP server component

 

▪

Fixed an issue with pre-v1.4.0 migration support

 

▪ Fixed flash storage support that caused boot loops on some devices 

v1.5.1b1

Release date: 2020-05-26

Bugfix:

 

▪

Fixed a bug with IR reception

v1.5.0b8

Release date: 2020-05-11

New feature:

 

▪

Source locked mode is now supported.

 

▪

Scaling and frame rate conversion are also supported on transmitter side.

 

▪

The frame rate converter and scaler modules support image cropping in case of downscaling in center 

image position.

 

▪

12-bit deep color HDMI signals can be transmitted in 10 bit mode.

 

▪

Extended Identify Me feature to RJ45 ports

 

▪

Added support for cropper on secodary video pipe

 

▪

Added Compatible property to SFP nodes

 

▪

Added home screen to LCD menu

 

▪

Added local input loopback and copy features to RX mode

 

▪

Added support for automatic video freeze on signal loss as a NoSync option

 

▪

Added copy feature to TRX mode

 

▪

Added support for manual video freeze

 

▪

Added support for Dark Mode

 

▪ Updated video processing latency calculations (fixes tearing and flickering issues in some setups)

 

▪

Added processing latency property to video pipes

 

▪

Added support for altering Color Range

 

▪

Added overall Health Status properties

Bugfix:

 

▪ SCDC registers are only modified, if the connected display supports this protocol.

 

▪ 4k60 resolution was not transmitted to displays, which were 4k60 capable, but did not report SCDC 

capability in EDID, such as LG27UD58. Fixed.

 

▪

Fixed video tearing when converting between 60 and 24 Hz

 

▪

Fixed a glitch with EDID caching

 

▪

Fixed a glitch with HDMI outputs after operation mode change (TX/RX/TRX)

 

▪

Fixed a glitch with TMDS clocks between 310 and 340 MHz (e.g. 3440x1440p60)

 

▪

Fixed artifacts with video wall at 4K60

 

▪

Fixed HDMI audio node 'Connected' state

 

▪

Improved support for newer SFP+ standards (OM3/OM4 and copper lengths)

 

▪

Fixed a glitch that could cause an additional delay of one frame

 

 

Summary of Contents for UBEX-MMU-X200






























































































































































































































































Reviews:

No comments